[RULE] report with Slinky 0.5.02 part1

Richard Kweskin rkwesk at hellug.gr
Fri Aug 5 17:44:42 EEST 2005 

Hello All

I, too, have tried Franz's slinky 0.5.02 with FC4 cd's on a p1 233 mmx w 64mb. At first I was getting cdrom read errors on 3 different cdrom drives, but it seems that once I switched (using the same ribbon cable) first going to hda and then hbb, the seek errors ceased.

The box is not mine (so this is a first report with it.) No additional modules were needed and so I did not have David's experience. With some small things to be fixed, I can report that a first run with the absolute minimum of pkgs was a sucess.

Errors:

While installing, some pkgs had pre or post scripts that reported errors (logged in install.log.)
Group creation failed with several pkgs and errors are logged.
Grub installed properly but the grub.conf file had incorrect kernel and initrd names (2.6.9 instead of 2.6.11.) This was successfully overcome using the grub editor which resulted in a successful boot and follow-up editing of grub.conf.

df -h:
Filesystem            Size  Used Avail Use% Mounted on
/dev/hda5             1.1G  344M  675M  34% /
none                   30M     0   30M   0% /dev/shm
/dev/fd0              1.4M  6.0K  1.4M   1% /mnt/floppy

free:
             total       used       free     shared    buffers     cached
Mem:         60980      26312      34668          0       2464      18084
-/+ buffers/cache:       5764      55216
Swap:       159224          0     159224

dmesg:
Linux version 2.6.11-1.1369_FC4 (bhcompile at tweety.build.redhat.com) (gcc version 4.0.0 20050525 (Red Hat 4.0.0-9)) #1 Thu Jun 2 22:53:35 EDT 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
64MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 16384
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 12288 pages, LIFO batch:7
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.0 present.
ACPI: Unable to locate RSDP
Allocating PCI resources starting at 04000000 (gap: 04000000:fbf80000)
Built 1 zonelists
Kernel command line: root=/dev/hda5 ro
Initializing CPU#0
CPU 0 irqstacks, hard=c044a000 soft=c0449000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 232.694 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 59616k/65536k available (2467k kernel code, 5436k reserved, 685k data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 458.75 BogoMIPS (lpj=229376)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After all inits, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Intel Pentium MMX stepping 03
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
softlockup thread 0 started up.
Freeing initrd memory: 1083k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9b1, last bus=0
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:0f.0
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1123258060.385:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key F8472E5DA68A03D6
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 0000:00:07.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: QUANTUM FIREBALL_TM1280A, ATA DISK drive
hdb: HITACHI CDR-8130, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ST38410A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 2503872 sectors (1281 MB) w/76KiB Cache, CHS=2484/16/63, DMA
hda: cache flushes not supported
 hda: hda1 hda2 < hda5 >
hdc: max request size: 128KiB
hdc: 16841664 sectors (8622 MB) w/512KiB Cache, CHS=16708/16/63, (U)DMA
hdc: cache flushes not supported
 hdc: hdc1
hdb: ATAPI 16X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 128 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 4, 114688 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 184k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
EXT3 FS on hda5, internal journal
Adding 159224k swap on /dev/hda1.  Priority:-1 extents:1

end of part1, Richard

_______________________________________________
Rule Project HOME PAGE:  http://www.rule-project.org/en/
Rule-list at rule-project.org
http://mail.rule-project.org/mailman/listinfo/rule-list_rule-project.org

More information about the Rule-list mailing list