[RULE] SCSI install

[Forgosh, Seth]

Michael,
	Thanks again for the great support. The install was fairly straight
forward on my Vmware machine. On this box, I had a SCSI CD-ROM drive and a
floppy drive available with an IDE hard drive. Before booting from the CD, I
copied the scsi_mod.o, BusLogic.o and sr_mod.o modules to a floppy. This was
necessary to enable SCSI support once the system was booted. If possible, in
a future release, it would be helpful if these modules were available
without the floppy. Anyway, once I booted from the CD, I mounted the floppy
and loaded the SCSI modules via insmod commands. I then ran the setup.sh and
selected an all CD-ROM setup. When prompted for my CD device, the script
couldn't find it, but all I had to do was switch to another terminal session
and mount the CD manually. With that done, the setup proceeded as normal and
I was left with a working RH 8.0 build in 12 MB of RAM!! If anyone has any
questions on my setup, please feel free to ask and I'll do my best to
answer. Thanks again.

Seth Forgosh



-----Original Message-----
From: Michael Fratoni [mailto:mfratoni at tuxfan.homeip.net] 
Sent: Friday, January 24, 2003 7:14 PM
To: The main mailing list of the RULE project
Subject: Re: [RULE] SCSI install




**********************************************************************
This message, including any attachments, contains confidential information intended for a specific individual and purpose, and is protected by law.  If you are not the intended recipient, please contact sender immediately by reply e-mail and destroy all copies.  You are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited.
TIAA-CREF
**********************************************************************

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Friday 24 January 2003 08:45 am, Forgosh, Seth wrote:
> Michael,
> 	Thank-you so much for the quick response. The new package worked
like 
> a charm. I am currently testing the install in a VMWARE session with 
> 12mb of ram and everything is going smoothly. Tonight I will be 
> installing on a 486/33 with 12mb of RAM with the intent of using the 
> box as a firewall/proxy/router. Thank-you again for your excellent 
> work on this project.

You are welcome, glad it worked for you. If you wouldn't mind, could you 
post a quick writeup of the steps required to do the SCSI install?

- -- 
- -Michael

pgp key:  http://www.tuxfan.homeip.net:8080/gpgkey.txt
Red Hat Linux 7.{2,3}|8.0 in 8M of RAM: http://www.rule-project.org/
- --
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)

iD8DBQE+Mdbdn/07WoAb/SsRAhLRAJ93dsJLk0Na9qcXa8sXvS34B1DJuwCfRH4y
8gfuGzHfJPbDIBHbN5H8vWo=
=IipV
-----END PGP SIGNATURE-----



_______________________________________________
Rule Project HOME PAGE:  http://www.rule-project.org/en/
Rule Development Site:   http://savannah.gnu.org/projects/rule/
Rule-list at nongnu.org http://mail.nongnu.org/mailman/listinfo/rule-list


**********************************************************************
This message, including any attachments, contains confidential information intended for a specific individual and purpose, and is protected by law.  If you are not the intended recipient, please contact sender immediately by reply e-mail and destroy all copies.  You are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited.
TIAA-CREF
**********************************************************************


_______________________________________________
Rule Project HOME PAGE:  http://www.rule-project.org/en/
Rule Development Site:   http://savannah.gnu.org/projects/rule/
Rule-list at nongnu.org
http://mail.nongnu.org/mailman/listinfo/rule-list