new external hd 200gb

[giorgos_kess at freemail.gr]

geia sas paidia, 

exw parei twra enan e3wteriko sklhro 200gb, kai to mandrakelinux community 10.1 arneitai na mou ton anagnwrisei apo to usb.
eixa kai paliotera problhmata me tis 8yres usb, alla ta parekampta. 
twra omws einai anagkh. 
ekana thn entolh dmesq, opws me eixe symboulepsei paliotera kapoios, alla den exw idea ti shmainoun ta apotelesmata.
an mporei na me boh8hsei kapoios/a, 8a hmoun eugnwmwn.

na pros8esw oti exw notebook acer aspire me amd athlon xp-m 2400+ kai 512 sdram, 
an exei kapoia shmasia. 
eyxaristw poly

para8etw to output ths entolhs 

Linux version 2.6.8.1-10mdk (nplanel at n3.mandrakesoft.com) (gcc version 3.4.1 (Ma
ndrakelinux (Alpha 3.4.1-3mdk)) #1 Wed Sep 8 17:00:52 CEST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
 BIOS-e820: 000000001bef0000 - 000000001befb000 (ACPI data)
 BIOS-e820: 000000001befb000 - 000000001bf00000 (ACPI NVS)
 BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
446MB LOWMEM available.
On node 0 totalpages: 114416
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 110320 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD                                     ) @ 0x000f68c0
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1bef5b5f
ACPI: FADT (v001 KN400  PTLTW    0x06040000 PTL_ 0x000f4240) @ 0x1befae95
ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x1befaf09
ACPI: DSDT (v001  VIA   PTL_ACPI 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Kernel command line: BOOT_IMAGE=linux-nonfb ro root=305 devfs=nomount acpi=on re
sume=/dev/hda1
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 796.509 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 449628k/457664k available (1860k kernel code, 7260k reserved, 581k data,
 200k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1572.86 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps:  0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps:        0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Mobile AMD Athlon(tm) XP 2400+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
init init/main.c:689
init init/main.c:702
init init/main.c:707
do_pre_smp_initcalls init/main.c:653
do_pre_smp_initcalls init/main.c:659
init init/main.c:711
init init/main.c:714
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 796.0002 MHz.
..... host bus clock speed is 265.0334 MHz.
init init/main.c:716
init init/main.c:718
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
ACPI: Looking for DSDT in initrd ... not found!
Freeing initrd memory: 165k freed
init init/main.c:724
do_basic_setup init/main.c:634
do_basic_setup init/main.c:636
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd65c, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ10 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *4)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
ACPI: Embedded Controller [EC0] (gpe 1)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 4
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:00:11.6[C] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 4 (level, low) -> IRQ 4
vesafb: probe of vesafb0 failed with error -6
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1114117283.4294966303:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 4
PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 5
PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 9
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 4 (level, low) -> IRQ 4
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST94011A, ATA DISK drive
spurious 8259A interrupt: IRQ7.
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-K12RA, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
 Firmware: 5.8
 180 degree mounted touchpad
 Sensor: 29
 new absolute packet format
 Touchpad has extended capability bits
 -> 4 multi-buttons, i.e. besides standard buttons
 -> multifinger detection
 -> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
ACPI: (supports S0 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
init init/main.c:726
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 200k freed
Generic RTC Driver v1.07
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 4 (level, low) -> IRQ 4
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 4, io base 00001c00
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 5, io base 00001c20
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 9, io base 00001c40
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: irq 11, pci mem dc820800
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 4-3: new high speed USB device using address 2
usb 4-3: control timeout on ep0out
ehci_hcd 0000:00:10.3: Unlink after no-IRQ?  Different ACPI or APIC settings may
 help.
usb 4-3: control timeout on ep0out
usb 4-3: device not accepting address 2, error -110
usb 4-3: new high speed USB device using address 3
usb 4-3: control timeout on ep0out
usb 4-3: control timeout on ep0out
usb 4-3: device not accepting address 3, error -110
usb 4-3: new high speed USB device using address 4
usb 4-3: control timeout on ep0out
usb 4-3: control timeout on ep0out
usb 4-3: device not accepting address 4, error -110
usb 4-3: new high speed USB device using address 5
usb 4-3: control timeout on ep0out
usb 4-3: control timeout on ep0out
usb 4-3: device not accepting address 5, error -110
usb 4-3: new high speed USB device using address 6
usb 4-3: control timeout on ep0out
usb 4-3: control timeout on ep0out
usb 4-3: device not accepting address 6, error -110
EXT3 FS on hda5, internal journal
Adding 811240k swap on /dev/hda1.  Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KM400/KM400A chipset
agpgart: Maximum main memory to use for agp memory: 379M
agpgart: AGP aperture is 256M @ 0xe0000000
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: loaded (max 8 devices)
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[d0004000-d00047ff]  Max
Packet=[2048]
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 4 (level, low) -> IRQ 4
eth0: VIA Rhine II at 0x1800, 00:c0:9f:32:05:f1, IRQ 4.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1.
ip1394: $Rev: 1224 $ Ben Collins <bcollins at debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f000012fcd6]
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (54 C)
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 5 (level, low) -> IRQ 5
Yenta: CardBus bridge found at 0000:00:07.0 [1025:0033]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:07.0, mfunc 0x01201212, devctl 0x64
Yenta: ISA IRQ mask 0x0088, PCI irq 5
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
inserting floppy driver for 2.6.8.1-10mdk
FDC 0 is a National Semiconductor PC87306
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:11.5 to 64
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.3
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0323b60(lo)
IPv6 over IPv4 tunneling driver
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: No PST tables match this cpuid (0x7a0)
powernow: This is indicative of a broken BIOS.
powernow: Trying ACPI perflib
powernow: Minimum speed 354 MHz. Maximum speed 796 MHz.
eth0: no IPv6 routers present
usb 2-2: new low speed USB device using address 3
usb 2-2: device not accepting address 3, error -71
usb 2-2: new low speed USB device using address 5
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(T                                           M)] on usb-0000:00:10.1-2
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
ts: Compaq touchscreen protocol output
cdrom: This disc doesn't have any tracks I recognize!
cdrom: hdc: mmc-3 profile capable, current profile: 8h
cdrom: hdc: mmc-3 profile capable, current profile: 8h
ISO 9660 Extensions: RRIP_1991A
VFS: busy inodes on changed media.