Script started on Sun Feb 16 15:36:58 2003 linux:/home/customer # lsmod Module Size Used by Not tainted snd-pcm-oss 48576 0 (autoclean) snd-mixer-oss 14776 1 (autoclean) [snd-pcm-oss] videodev 6112 0 (autoclean) r128 86296 11 agpgart 37536 3 (autoclean) isa-pnp 31520 0 (unused) usbserial 19644 0 (autoclean) (unused) parport_pc 27784 1 (autoclean) lp 6848 0 (autoclean) parport 25056 1 (autoclean) [parport_pc lp] ipv6 150036 -1 (autoclean) st 28428 0 (autoclean) (unused) sr_mod 14616 0 (autoclean) sg 29568 0 (autoclean) joydev 5920 0 (unused) evdev 4640 0 (unused) input 3296 0 [joydev evdev] usb-uhci 23052 0 (unused) af_packet 13800 1 (autoclean) 8139too 15208 1 mii 1232 0 [8139too] snd-via8233 7820 1 snd-pcm 71264 0 [snd-pcm-oss snd-via8233] snd-timer 13156 0 [snd-pcm] snd-ac97-codec 30052 0 [snd-via8233] snd 35556 0 [snd-pcm-oss snd-mixer-oss snd-via8233 snd-pcm snd-timer snd-ac97-codec] usbcore 61696 1 [usbserial usb-uhci snd] soundcore 3716 0 [snd] lvm-mod 65184 0 (autoclean) ide-scsi 8816 0 ide-cd 30340 0 cdrom 28736 0 [sr_mod ide-cd] reiserfs 193424 1 linux:/home/customer # modprobe rtl8139 /lib/modules/2.4.19-4GB/kernel/drivers/net/rtl8139.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.19-4GB/kernel/drivers/net/rtl8139.o: insmod /lib/modules/2.4.19-4GB/kernel/drivers/net/rtl8139.o failed /lib/modules/2.4.19-4GB/kernel/drivers/net/rtl8139.o: insmod rtl8139 failed linux:/home/customer # ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:02:2A:BE:DB:98 inet6 addr: fe80::202:2aff:febe:db98/10 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:3708 (3.6 Kb) Interrupt:5 Base address:0x9000 linux:/home/customer # dhclient eth0 Internet Software Consortium DHCP Client V3.0.1rc9 Copyright 1995-2001 Internet Software Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP sit0: unknown hardware address type 776 sit0: unknown hardware address type 776 Listening on LPF/eth0/00:02:2a:be:db:98 Sending on LPF/eth0/00:02:2a:be:db:98 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 No DHCPOFFERS received. No working leases in persistent database - sleeping. linux:/home/customer # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface linux:/home/customer # ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 : 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.037 ms 64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.034 ms 64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_seq=5 ttl=64