nForce2 USB HP 5550 problem
Vagelis D.
vdiogos at yahoo.gr
Sat Feb 7 15:59:28 EET 2004
Χαίρετε,
Έχω πρόβλημα στο να κάνω τον HP-5550 εκτυπωτή μου να δουλέψει με το
Mandrake 9.2(kernel 2.4.22). Δεν τον βλέπει στη USB. Πριν, σε έναν P3,
με την ίδια διανομή αλλά άλλη μητρική μου δούλευε μια χαρά. Έχω την
εντύπωση ότι το πρόβλημα υπάρχει στο USB αλλά μετά από λίγο googling δεν
βρήκα να είχε κανείς πρόβλημα με τη συγκεκριμένη μητρική (Gigabyte
7N400-L, τσιπάκι nForce2) και μου φαίνεται
$ lspci -v
---------------------------------------
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?)
(rev c1)
Flags: bus master, 66Mhz, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: Giga-byte Technology: Unknown device 0c11
Flags: 66Mhz, fast devsel, IRQ 5
I/O ports at e400 [size=32]
Capabilities: <available only to root>
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
Memory at e9003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 9
Memory at e9004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev
a4) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5
Memory at e9005000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev
a3) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e8000000-e8ffffff
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00
[Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: e6000000-e7ffffff
Prefetchable memory behind bridge: e4000000-e5ffffff
$ dmesg
---------------------------------------
Linux version 2.4.22-21mdk (qateam at updates.mandrakesoft.com) (gcc
version 3.3.1
(Mandrake Linux 9.2 3.3.1-2mdk)) #1 Fri Oct 24 22:43:28 MDT 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
found SMP MP-table at 000f50c0
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f0000 reserved twice.
hm, page 000f1000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 Nvidia ) @ 0x000f6a00
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff74c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=linux ro root=305 devfs=mount
hdd=ide-scsi acpi=
ht resume=/dev/hda6 splash=silent
ide_setup: hdd=ide-scsi
bootsplash: silent mode.
Initializing CPU#0
Detected 1913.189 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3814.19 BogoMIPS
Memory: 514636k/524224k available (1483k kernel code, 9200k reserved,
-1936k dat
a, 156k init, 0k highmem, 0k BadRAM)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 2600+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-9, 2-16, 2-17, 2-18, 2-20, 2-21, 2-22, 2-23
not con
nected.
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 001 01 0 0 0 0 0 1 1 31
01 001 01 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 000 00 1 0 0 0 0 0 0 00
0a 001 01 0 0 0 0 0 1 1 71
0b 001 01 0 0 0 0 0 1 1 79
0c 001 01 0 0 0 0 0 1 1 81
0d 001 01 0 0 0 0 0 1 1 89
0e 001 01 0 0 0 0 0 1 1 91
0f 001 01 0 0 0 0 0 1 1 99
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 001 01 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1913.1172 MHz.
..... host bus clock speed is 332.7160 MHz.
cpu: 0, clocks: 3327160, slice: 1663580
CPU0<T0:3327152,T1:1663568,D:4,S:1663580,C:3327160>
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20031002
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfaad0, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/01e0] at 00:00.0
PCI->APIC IRQ transform: (B2,I0,P0) -> 19
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xe4000000, mapped to 0xe0800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:0336
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... silenjpeg size 107888 bytes, found
(800x600, 1078
40 bytes, v3).
Got silent jpeg.
Got silent jpeg.
Console: switching to colour frame buffer device 92x32
fb0: VESA VGA frame buffer device
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_I
RQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: nVidia Corporation nForce2 IDE UDMA133 (rev a2) UDMA133
controller on p
ci00:09.0
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: QUANTUM FIREBALLlct08 13, ATA DISK drive
blk: queue c0181bc0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0181cfc, I/O limit 4095Mb (mask 0xffffffff)
hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive
hdd: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: setmax LBA 160086528, native 160084415
hda: 160084415 sectors (81963 MB) w/2048KiB Cache, CHS=9964/255/63,
UDMA(133)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 25427711 sectors (13019 MB) w/418KiB Cache, CHS=1582/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 >
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Resume Machine: This is normal swap space
Swsusp 1.0.3: kswsuspd starting
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 346k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
reiserfs journal head cache initialized
reiserfs: found format "3.6" with standard journal
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ide0(3,5)) ...
for (ide0(3,5))
ide0(3,5):Using r5 hash to sort names
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xe0a81000, IRQ 11
usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB 1.1 OHCI Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xe0a83000, IRQ 9
usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB 1.1 OHCI
Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usbdevfs: remount parameter error
hub.c: new USB device 00:02.1-1, assigned address 2
Adding Swap: 682720k swap-space (priority -1)
Adding Swap: 417648k swap-space (priority -2)
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PLEXTOR Model: CD-R PX-W4824A Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
reiserfs: found format "3.6" with standard journal
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ide0(3,69)) ...
for (ide0(3,69))
ide0(3,69):Using r5 hash to sort names
NTFS driver 2.1.4a [Flags: R/O MODULE].
NTFS volume version 3.1.
MSDOS FS: IO charset utf8
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:02.1-1, assigned address 3
inserting floppy driver for 2.4.22-21mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)
Nvidia + AC97 Audio, version 0.24, 19:33:02 Jan 20 2004
Nvaudio: in Funcction Nvaudio_init_module
PCI: Setting latency timer of device 00:06.0 to 64
Nvaudio: NVIDIA nForce2 Audio found at IO 0xd800 and 0xd400, IRQ 9
Nvaudio: Audio Controller supports 6 channels.
NVaudio: Defaulting to base 2 channel mode.
ac97_codec: AC97 codec, id: ALG96 (Unknown)
Nvaudio: only 48Khz playback available.
Nvaudio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not
present), tota
l channels = 2
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-5328
Wed Dec 17
13:54:51 PST 2003
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
Looking for splash picture.... found (800x600, 18668 bytes, v3).
Splash status on console 0 changed to on
Looking for splash picture.... found (800x600, 18668 bytes, v3).
Splash status on console 1 changed to on
Looking for splash picture.... found (800x600, 18668 bytes, v3).
Splash status on console 2 changed to on
Looking for splash picture.... found (800x600, 18668 bytes, v3).
Splash status on console 3 changed to on
Looking for splash picture.... found (800x600, 18668 bytes, v3).
Splash status on console 4 changed to on
Looking for splash picture.... found (800x600, 18668 bytes, v3).
Splash status on console 5 changed to on
NET4: Linux IPX 0.47 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
NET4: AppleTalk 0.18a for Linux NET4.0
usb.c: registered new driver usblp
printer.c: v0.11: USB Printer Device Class driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
More information about the Linux-greek-users
mailing list