Problhma me printer

[George Daflidis-Kotsis]

On Thu, May 06, 1999 at 03:27:10AM +0300, Panayotis Vryonis wrote:

> Emena mou fainetai san hardware problhma. Kai ekshgw:
> kati den paei kala kai o lpd den briskei ton ektupwth. Xrhsimopoieis
> to swsto device? (dokimase /dev/lp0 , /dev/lp1 k.l.). Mhpws exeis
> problhma me ta irqs ths parallhlhs? Des "man tunelp".

BTW, stous 2.2.x kernels alla3e h onomasia twn lp devices apo oti diabaza.
An sto /etc/printcap exeis ton printer sou sto lp2 bale ton sto lp1 kai des ti ginetai.


Parallel Ports
==============
   As of 2.1.33, parallel port support can now by handled by the parport
driver.  Be aware that with Plug-and-Play support turned on, your
parallel port may no longer be where you expect it; for example, LPT1
(under DOS) was sometimes /dev/lp1 in Linux, but will probably be
/dev/lp0 with the new Plug-and-Play driver.  If printing breaks with
the new driver, try checking your lpd configuration.  A good source of
more information is the Documentation/parport.txt file included with
the kernel.

-- 
-- George Daflidis-Kotsis -- <gdk at demon.net> -- Demon Internet Ltd. --
-- Welcome to hell, here is your DoubleSpaced 386SX and Windows 98. --
--
====================================================================
Gia boithia (h na diagrafhte) e-mail sto majordomo at hellug.gr
Ta archives tis listas einai sto http://lists.hellug.gr/archives
prin steilete kapoia erothsh psakte mipos exei hdh apanththei.
Gia opoiodipote problima stilte e-mail ston owner-linux-greek-users at hellug.gr
====================================================================