to kdm den diabazei to passwd
John Exidaridis
exindari at math.upatras.gr
Sat Mar 21 17:59:13 EET 1998
isobiths wrote:
> `,
> <--- ,\, #
> |/ ? SEE YA!
> | ~ )\ -------
> /_ /\ \____ sakis doupas
> ~_/ \ e-mail: adoupas at obelix.ee.duth.gr
> adoupas at rodopi.cc.duth.gr
>
> On Tue, 17 Mar 1998, John Exidaridis wrote:
>
> >
> >
> > isobiths wrote:
> >
> > > egatesthsa to kde 3 alla den mporw na kanw login
> > > me to kdm.ypopteyomai oti ftaiei pou exw shadow
> > > password file alla den 3erw ti na kanw,exei kaneis kamia
> > > idea;
> > >
> > > `,
> > > <--- ,\, #
> > > |/ ? SEE YA!
> > > | ~ )\ -------
> > > /_ /\ \____ sakis doupas
> > > ~_/ \ e-mail: adoupas at obelix.ee.duth.gr
> > > adoupas at rodopi.cc.duth.gr
> > >
> > > --
> > > ====================================================================
> > > Gia boithia (h na diagrafhte) e-mail sto majordomo at argos.hol.gr
> > > Ta archives tis listas einai sto http://www.argos.hol.gr/lists :
> > > prin steilete kapoia erothsh psakte mipos exei hdh apanththei.
> > > Gia opoiodipote problima stilte e-mail ston owner-linux-greek-users
> > > ====================================================================
> >
> > Paromoio problhma eixa kai egv alla to elysa. Loipon koita na deis
> > ti ginetai. Ontws logv beta ekdoshs to Kdm den ta paei
> > kala me ta password. H tha kaneis compile to kde me thn epilogh
> > (--without pam) h kapvs etsi. H tha kaneis mia mikrh epmebash sto
> > /etc/pam.d/login. Prin soy pv akribvw ti thelei gia epibebaivsh rikse
> > mia matia sta /var/log/xdm-error.log kai pes moy ti akribvs to mynhma
> > poy bgazei.
> >
> > Giannis
> >
> > --
> > ====================================================================
> > Gia boithia (h na diagrafhte) e-mail sto majordomo at argos.hol.gr
> > Ta archives tis listas einai sto http://www.argos.hol.gr/lists :
> > prin steilete kapoia erothsh psakte mipos exei hdh apanththei.
> > Gia opoiodipote problima stilte e-mail ston owner-linux-greek-users
> > ====================================================================
> >
> ayto einai to X0msgs.
> mhpws ayta ta extension modules mou kanoun th zhmia;
> egw exw slackware kai sto etc den exw directory /pam.d
> 3ereis pou brisketai to antistoixo configuration;
>
> XFree86 Version 3.2 / X Window System
> (protocol Version 11, revision 0, vendor release 6100)
> Release Date: Oct 26 1996
> If the server is older than 6-12 months, or if your card is newer
> than the above date, look for a newer version before reporting
> problems. (see http://www.XFree86.Org/FAQ)
> Operating System: Linux [ELF]
> Configured drivers:
> S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
> s3_ViRGE
> (using VT number 7)
>
> XF86Config: /etc/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
> (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200,
> 3 button emulation (timeout: 50ms)
> (**) S3: Graphics device ID: "Diamond Stealth 3D 2000"
> (**) S3: Monitor ID: "My Monitor"
> (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fon
> ts/100dpi/"
> (--) S3: PCI: ViRGE rev 6, Linear FB @ 0xe0000000
> (--) S3: card type: PCI
> (--) S3: chipset: ViRGE rev. 61
> (--) S3: chipset driver: s3_ViRGE
> (--) S3: videoram: 2048k
> (--) S3: Ramdac type: s3_trio64
> (--) S3: Ramdac speed: 135
> (--) S3: Using Trio32/64 programmable clock (MCLK 54.886 MHz)
> (--) S3: Maximum allowed dot-clock: 80.000 MHz
> (**) S3: Mode "1024x768": mode clock = 75.000
> (**) S3: Mode "800x600": mode clock = 50.000
> (**) S3: Mode "640x480": mode clock = 31.500
> (**) S3: Using 16 bpp. Color weight: 565
> (**) S3: Virtual resolution set to 1024x768
> (--) S3: Local bus LAW is 0xE00xxxxx
> (--) S3: Using a banksize of 2048k, line width of 1024
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> Couldn't load XKB keymap, falling back to pre-XKB keymap
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> Couldn't load XKB keymap, falling back to pre-XKB keymap
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> Couldn't load XKB keymap, falling back to pre-XKB keymap
> PEX extension module not loaded
> XIE extension module not loaded
> Couldn't load XKB keymap, falling back to pre-XKB keymap
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> Couldn't load XKB keymap, falling back to pre-XKB keymap
> PEX extension module not loaded
> XIE extension module not loaded
> Couldn't load XKB keymap, falling back to pre-XKB keymap
> PEX extension module not loaded
> XIE extension module not loaded
> Couldn't load XKB keymap, falling back to pre-XKB keymap
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> Couldn't load XKB keymap, falling back to pre-XKB keymap
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> Couldn't load XKB keymap, falling back to pre-XKB keymap
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
> PEX extension module not loaded
> XIE extension module not loaded
>
> XFree86 Version 3.2 / X Window System
> (protocol Version 11, revision 0, vendor release 6100)
> Release Date: Oct 26 1996
> If the server is older than 6-12 months, or if your card is newer
> than the above date, look for a newer version before reporting
> problems. (see http://www.XFree86.Org/FAQ)
> Operating System: Linux [ELF]
> Configured drivers:
> S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
> s3_ViRGE
> (using VT number 7)
>
> XF86Config: /etc/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
> (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200,
> 3 button emulation (timeout: 50ms)
> (**) S3: Graphics device ID: "Diamond Stealth 3D 2000"
> (**) S3: Monitor ID: "My Monitor"
> (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fon
> ts/100dpi/"
> (--) S3: PCI: ViRGE rev 6, Linear FB @ 0xe0000000
> (--) S3: card type: PCI
> (--) S3: chipset: ViRGE rev. 61
> (--) S3: chipset driver: s3_ViRGE
> (--) S3: videoram: 2048k
> (--) S3: Ramdac type: s3_trio64
> (--) S3: Ramdac speed: 135
> (--) S3: Using Trio32/64 programmable clock (MCLK 54.886 MHz)
> (--) S3: Maximum allowed dot-clock: 80.000 MHz
> (**) S3: Mode "1024x768": mode clock = 75.000
> (**) S3: Mode "800x600": mode clock = 50.000
> (**) S3: Mode "640x480": mode clock = 31.500
> (**) S3: Using 16 bpp. Color weight: 565
> (**) S3: Virtual resolution set to 1024x768
> (--) S3: Local bus LAW is 0xE00xxxxx
> (--) S3: Using a banksize of 2048k, line width of 1024
> PEX extension module not loaded
> XIE extension module not loaded
>
> XFree86 Version 3.2 / X Window System
> (protocol Version 11, revision 0, vendor release 6100)
> Release Date: Oct 26 1996
> If the server is older than 6-12 months, or if your card is newer
> than the above date, look for a newer version before reporting
> problems. (see http://www.XFree86.Org/FAQ)
> Operating System: Linux [ELF]
> Configured drivers:
> S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
> s3_ViRGE
> (using VT number 7)
>
> XF86Config: /etc/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
> (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200,
> 3 button emulation (timeout: 50ms)
> (**) S3: Graphics device ID: "Diamond Stealth 3D 2000"
> (**) S3: Monitor ID: "My Monitor"
> (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fon
> ts/100dpi/"
> (--) S3: PCI: ViRGE rev 6, Linear FB @ 0xe0000000
> (--) S3: card type: PCI
> (--) S3: chipset: ViRGE rev. 61
> (--) S3: chipset driver: s3_ViRGE
> (--) S3: videoram: 2048k
> (--) S3: Ramdac type: s3_trio64
> (--) S3: Ramdac speed: 135
> (--) S3: Using Trio32/64 programmable clock (MCLK 54.886 MHz)
> (--) S3: Maximum allowed dot-clock: 80.000 MHz
> (**) S3: Mode "1024x768": mode clock = 75.000
> (**) S3: Mode "800x600": mode clock = 50.000
> (**) S3: Mode "640x480": mode clock = 31.500
> (**) S3: Using 16 bpp. Color weight: 565
> (**) S3: Virtual resolution set to 1024x768
> (--) S3: Local bus LAW is 0xE00xxxxx
> (--) S3: Using a banksize of 2048k, line width of 1024
> PEX extension module not loaded
> XIE extension module not loaded
>
> --
> ====================================================================
> Gia boithia (h na diagrafhte) e-mail sto majordomo at argos.hol.gr
> Ta archives tis listas einai sto http://www.argos.hol.gr/lists :
> prin steilete kapoia erothsh psakte mipos exei hdh apanththei.
> Gia opoiodipote problima stilte e-mail ston owner-linux-greek-users
> ====================================================================
Oxi den koitaksa akomh ayto poy rvthses alla apo oti ematha dokimase na kaneis compile to KDE base me tis entoles
./configure --with-shadow
make Install
make
An den petyxsei tote tha koitaksv ayto poy moy eipes
Giannis
--
====================================================================
Gia boithia (h na diagrafhte) e-mail sto majordomo at argos.hol.gr
Ta archives tis listas einai sto http://www.argos.hol.gr/lists :
prin steilete kapoia erothsh psakte mipos exei hdh apanththei.
Gia opoiodipote problima stilte e-mail ston owner-linux-greek-users
====================================================================
More information about the Linux-greek-users
mailing list