Sindesi 2 Linux

[Sotiris Tsimbonis]

On Sun, 28 Jun 1998, Kostas Lialiambis wrote:
> Parepiptontws, to Linux Journal toy Ioynioy eixe ayto poy lete san basiko
> 8ema. Proteine nfs poy 8a trexei mesw plip. Ta e3hgei ola (exei ola ta
> configuration files analytika) alla den exei to basikwtero: Pws 8a kaneis
> ena swsto paralhlo kalwdio an den mporeis na to breis sto emporio. Egw

Pali kala pou exoume kai to NET-3 HOWTO pou mas to leei.. :-)
http://linux.forthnet.gr/LDP/HOWTO/NET-3-HOWTO-7.html#ss7.2


7.2 Parallel port cable (PLIP cable) 

If you intend to use the PLIP protocol between two machines then this
cable will work for you irrespective of what sort of parallel ports you
have installed. 

     Pin Name    pin            pin
     STROBE      1*
     D0->ERROR   2  ----------- 15
     D1->SLCT    3  ----------- 13
     D2->PAPOUT  4  ----------- 12
     D3->ACK     5  ----------- 10
     D4->BUSY    6  ----------- 11
     D5          7*
     D6          8*
     D7          9*
     ACK->D3     10 ----------- 5
     BUSY->D4    11 ----------- 6
     PAPOUT->D2  12 ----------- 4
     SLCT->D1    13 ----------- 3
     FEED        14*
     ERROR->D0   15 ----------- 2
     INIT        16*
     SLCTIN      17*
     GROUND      25 ----------- 25

Notes: 

     Do not connect the pins marked with an asterisk `*'. 
     Extra grounds are 18,19,20,21,22,23 and 24. 

     If the cable you are using has a metallic shield, it should be
     connected to the metallic DB-25 shell at one end only. 

Warning: A miswired PLIP cable can destroy your controller card. Be very
careful and double check every connection to ensure you don't cause
yourself any unnecessary work or heartache.

While you may be able to run PLIP cables for long distances, you should
avoid it if you can. The specifications for the cable allow for a cable
length of about 1 metre or so. Please be very careful when running long
plip cables as sources of strong electromagnetic fields such as lightning,
power lines and radio transmitters can interfere with and sometimes even
damage your controller. If you really want to connect two of your
computers over a large distance you really should be looking at obtaining
a pair of thin-net ethernet cards and running some coaxial cable.

--
====================================================================
Gia boithia (h na diagrafhte) e-mail sto majordomo at argos.hol.gr
Ta archives tis listas einai sto http://www.argos.hol.gr/lists :
prin steilete kapoia erothsh psakte mipos exei hdh apanththei.
Gia opoiodipote problima stilte e-mail ston owner-linux-greek-users
====================================================================